$1,683.00
General Microprocessor controlled ECU expansion unit Outputs 10 user configurable general purpose Pulse Width Modulated power outputs 2 full bridges also configurable as 4 half bridges or 4 PWMs* *...
General Microprocessor controlled ECU expansion unit Outputs 10 user configurable general purpose Pulse Width Modulated power outputs 2 full bridges also configurable as 4 half bridges or 4 PWMs* *...
Sku: LR-X10
Vendor: Life Racing

General

  • Microprocessor controlled ECU expansion unit

Outputs

  • 10 user configurable general purpose Pulse Width Modulated power outputs
  • 2 full bridges also configurable as 4 half bridges or 4 PWMs*

* Not all functions available simultaneously see relevant pinout documentation

Inputs

  • 10 user configurable general purpose analogue sensor inputs, including up to 6 bipolar,
    inductive or hall effect speed / engine position inputs*

* Not all functions available simultaneously see relevant pinout documentation

Interfaces

  • 100MHz full duplex Ethernet for firmware upgrades
  • 1 dedicated CAN 2.0B interface for custom master/slave link to any Life Racing ECU
  • 1 CAN 2.0B interface for communication with other controllers or logging systems

Power Supply

  • 6 to 32V input voltage range with reverse polarity protection
  • 1 regulated 5V sensor supply output with individual short circuit protection
  • 1 protected sensor ground connection

Physical

  • 35 Way AMP sealed connector
  • CNC machined aluminium case sealed to IP67
  • Maximum dimensions including the connector 130 x 121 x 43 mm
  • Total mass is ~360 grams
  • Operating Temperature -25 to +85°C

General

  • Microprocessor controlled ECU expansion unit

Outputs

  • 10 user configurable general purpose Pulse Width Modulated power outputs
  • 2 full bridges also configurable as 4 half bridges or 4 PWMs*

* Not all functions available simultaneously see relevant pinout documentation

Inputs

  • 10 user configurable general purpose analogue sensor inputs, including up to 6 bipolar,
    inductive or hall effect speed / engine position inputs*

* Not all functions available simultaneously see relevant pinout documentation

Interfaces

  • 100MHz full duplex Ethernet for firmware upgrades
  • 1 dedicated CAN 2.0B interface for custom master/slave link to any Life Racing ECU
  • 1 CAN 2.0B interface for communication with other controllers or logging systems

Power Supply

  • 6 to 32V input voltage range with reverse polarity protection
  • 1 regulated 5V sensor supply output with individual short circuit protection
  • 1 protected sensor ground connection

Physical

  • 35 Way AMP sealed connector
  • CNC machined aluminium case sealed to IP67
  • Maximum dimensions including the connector 130 x 121 x 43 mm
  • Total mass is ~360 grams
  • Operating Temperature -25 to +85°C